Magnetic Flow Meters for Solids & Slurries

Slurry Electromagnetic Flow Meter

Aimag S slurry electromagnetic flow meter is used to measure the volume flow rate of conductive liquids with conductivity greater than 5μs/cm. In addition to measuring the volume flow rate of general conductive liquids, it can also be used to measure the volume flow rate of strong corrosive liquids such as strong acids, strong bases and uniform liquid-solid two-phase suspended liquids such as mud, slurry, pulp and paper pulp.

Nominal Diameter: DN15~DN600

Accuracy: ±0.5%/±0.2%

Measuring Range: 0.1m/s~12m/s

Electrode Material: Stainless Steel 316L; Hastelloy B; Hastelloy C; Platinum; Tantalum; Titanium

Liner Material: PTFE; Neoprene; Hard Rubber; Polyurethane; PFA; FEP

Product Details

Technical Parameters

Model Number	Aimag S
Nominal Diameter	DN15~DN600
Accuracy	±0.5%/±0.2%
Electrode Material	Stainless Steel 316L; Hastelloy B; Hastelloy C; Platinum; Tantalum; Titanium
Liner Material	PTFE; Neoprene; Hard Rubber; Polyurethane; PFA; FEP
Ambient Temperature	-20°C~60°C, with display
Ambient Temperature	-40°C~60°C, without display
Process temperature	0°C~80°C, Neoprene
	-20°C~65°C, Polyurethane
	-40°C~130°C, PTFE
	-20°C~150°C, PFA
	-20°C~180°C, PFA high temperature
Measuring Range	0.1m/s~12m/s
Conductivity	≥2μs/cm
Communication	Modbus RS485(Standard), HART(Optional), GPRS/GSM (Optional)
Output Signal	4~20mA / Frequency / Pulse
Explosion Certification	NEPSI Ex db eb ia IIC T3…T6 Gb
Certification	ISO, EAC, 3A, CE, SIL
Protection Grade	IP67 / IP68(optional)

The slurry electromagnetic flow meter is unaffected by changes in fluid density, viscosity, temperature, pressure and conductivity. There are no moving parts and no throttling parts to impede fluid flow, so it does not cause any additional pressure loss when the fluid passes through, and at the same time, it does not cause problems such as wear and tear, clogging, etc. It is especially suitable for measuring liquid-solid two-phase fluids such as slurries, sewage and other slurries with solid particles, as well as a variety of viscous slurries. Similarly, due to its structure without moving parts, it can be attached to a corrosion-resistant insulating liner and select corrosion-resistant materials made of electrodes, to play a very good corrosion resistance, so that it can be used for a variety of corrosive media measurement.

Slurry Electromagnetic Flow Meter Features:

Measurement is unaffected by changes in fluid density, viscosity, temperature, pressure and conductivity.
No flow blocking parts, no pressure loss, straight pipe section requirements are low, the measurement of slurry has a unique adaptability.
Different configurations of lining and electrode can measure strong corrosive and wear-resistant media.
With self-test and self-diagnostic function, stable zero point, high accuracy.
Can measure pure water, suitable for low conductivity media flow measurement, The conductivity of the fluid must be greater than 2μs/cm.
Can be used for rapid flow measurement in process control, response time 0.05s.
The flow meter is reliable and durable, through 1000 hours of double 85 temperature and humidity severity test.
Repeatability is better than 0.06%, better than most slurry electromagnetic flow meter manufacturers.