Clamp On Ultrasonic Flow Meter

Clamp-on ultrasonic flow meter installation, its installation is simple, without the need to destroy the pipeline, no pressure loss, does not affect the passage of the medium, the measuring range is large, pipeline matching ability is high, in the measurement of volumetric flow of the condition is almost independent of the fluid density, pressure, temperature, viscosity, and other parameters of the influence of the special environment.

Pipe diameter: DN15-DN6000

Accuracy: ±1%

Power supply: 8-36VDC, AC85-264V

Output: 4~20mA, relay, RS485

Protection grade: IP68

Process temperature: -30°C~160°C

Product Details

Technical Parameters

Product	Clamp-on Ultrasonic Flowmeter
Pipe Size	15mm~6000mm
Accuracy	±1%
Signal output	1 way 4~20mA output
	1 way OCT pulse output
	1 way replays output
Interface	RS485, support MODBUS
Liquid Types	Virtually all liquids
Working Temperature	Convertor: -20~60°C; Flow Transducer: -30~160°C
Working humidity	Convertor: 85%RH
Power Supply	DC8~36V or AC85~264V(optional)
Date Logger	Built-in data logger can store over 2000 lines of data
Case Material	ABS
Dimension	17018056mm(Convertor)

The clamp-On ultrasonic flow meter adopts the non-contact measurement principle to measure the flow of liquid or gas through the transmission and reception of ultrasonic waves. It can measure the flow of large-diameter media and can also be used to measure media that are not easy to contact and observe. The installation is simple and convenient. The sensor probe is directly installed on the outer wall of the pipe. The flow meter installation and flow measurement can be completed without breaking the pipe or stopping production.

Features of Clamp-on Ultrasonic Flow Meter:

Non-contact measurement: There is no need to destroy the pipeline. Flow measurement can be performed on the installed pipeline without breaking the pipe and stopping the flow, realizing non-destructive installation.
No pressure loss: Since no object needs to be inserted into the pipeline, the clamp-On ultrasonic flow meter will not cause pressure loss to the fluid.
High accuracy: The accuracy can reach 1.0%. Through advanced measurement technology and algorithms, it can provide high-accuracy flow data.
Simple maintenance: Regularly check the working status of the equipment, clean the sensor and clamp, and the maintenance cost is low.
Widely applicable: It can measure a wide range of liquids, including water, seawater, slurry or oil, acid, alkali and other uniform liquids.